BPDTB - ABLEBOND 71-1
- MSDS: BPDTB
- Manufacturer: ABLESTIK LABORATORIES
- Product Name: ABLEBOND 71-1
- National Stock Number: 8040-00N030181
Product Identification
Product ID:ABLEBOND 71-1
MSDS Date:04/11/1986
FSC:8040
NIIN:00N030181
MSDS Number: BPDTB
Responsible Party
RANCHO DOMINGUEZ, CA 90221
US
Emergency Phone: 213-764-4600
Info Phone: 213-764-4600
Preparer: STELLA JOU
Cage: 9V874
Contractor
Telephone: 310-764-4600
Cage: 21109
Ingredients
SILVER (SARA III)
CAS: 7440-22-4
RTECS: VW3500000
Fraction By Weight: <70%
OSHA PEL 0.01 MG/M3
ACGIH TLV: 0.1 MG/M3
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
LD50 LC50 Mixture:LD50:(ORAL RAT) 4200 MG/KG.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN:PROLONGED OR REPEATED CONTACT CAN
CAUSE DERMATITIS CHARACTERIZED BY BLISTERS, CRACKING, AND EDEMA.
EYE:VAPORS SLIGHTLY UNCOMFORTABLE. WILL CAUSE PAINFUL BURNING AND
INFLAMMATION OF CONJUNCTIVA. I NGEST:MODERATELY TOXIC. CHRONIC:NO
INFORMATION AVAILABLE.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYE:FLUSH WITH WATER FOR AT LEAST 15 MINUTES. GET MD.
SKIN:WASH IMMEDIATELY WITH SOAP & WATER. IF IRRITATION PERSISTS,
GET MD. INHAL:MOVE TO FRESH AIR IMMEDIATELY. INGEST:GET MD
IMMEDIATELY, AND SHOW CONTAINER LABEL.
Fire Fighting
Flash Point Method:OC
Flash Point:204F,96C
Lower Limits:1.3%
Upper Limits:9.5%
Extinguishing Media:FOAM, CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.
Accidental Release
Spill Release Procedures:WIPE UP WITH SOLVENT SATURATED TOWELING AND
COLLECT IN AN APPROPRIATE CONTAINER FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE REFRIGERATED AT ALL TIMES.
Other Precautions:AVOID CONTACT WITH SKIN, EYES, AND CLOTHING. GOOD
HOUSEKEEPING IS REQUIRED. AVOID INHALATION OF VAPORS.
Exposure Controls
Respiratory Protection:THE USE OF A NIOSH/MSHA APPROVED MASK FOR TOXIC
DUSTS IS REQUIRED IF CURED PRODUCT IS TO BE DRY SANDED, ABRADED,
ETC.
Ventilation:LOCAL EXHAUST IS RECOMMENDED WHEN APPROPRIATE CONTROL
EMPLOYEES EXPOSURE.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE EQUIPMENT TO COVER EXPOSED AREAS.
Work Hygienic Practices:VENT CURING OVEN TO OUTDOORS.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:T6
Boiling Pt:B.P. Text:395F,202C
Vapor Pres:0.29 @ 20C
Vapor Density:3.40
Spec Gravity:2.4
Evaporation Rate & Reference:0.06 (BUTYL ACETATE=1)
Solubility in Water:<30
Appearance and Odor:LIGHT SILVER PASTE WITH MILD AMINE-LIKE ODOR.
Percent Volatiles by Volume:55
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:CO, NOX.
Disposal
Waste Disposal Methods:DISPOSE OF IN AN APPROVED CHEMICAL DISPOSAL AREA
OR IN A MANNER WHICH COMPLIES WITH ALL LOCAL, STATE, AND FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.